SELEE also offers a range of additional products to serve the needs of our clients.  Additional products include:

 
 

Thermal Processing Products

 

SELEE Corporation offers a complete line of kiln furniture, kiln components and accessories, everything from dense to low mass products to meet every application need.  Our complete line of kiln components will provide a solution for every rebuild project along with applications engineering assistance for special design requirements.

 

Kiln-Components-3.jpg

KILN COMPONENTS

Our Engineered Ceramics® division produces kiln components that are a vital part of every high temperature furnace. 

Their performance is often overlooked or taken for granted. However, proper material selection and design can result in 1) increased service life, 2) reduced maintenance cost, and 3) lower energy consumption. 

Proprietary material compositions allow us to balance the applications needs of strength, thermal shock resistance and thermal mass. 

Products Include:

  • Burner/Tap Out Blocks
  • Beams 
  • Muffles 
  • Skid Rails 
  • Element Sleeves 
  • Tubes 
  • Perimeter Blocks

KILN FURNITURE

SELEE Corporation's proprietary materials offer you increased product quality, longer service life, and reduced energy consumption.  Products include:

  • Saggers
  • Boats
  • Setters
  • Spacers

Together with Engineered Ceramics®, we offer custom-designed systems using our Micromass®, Tylar® and HYcor® product lines to meet virtually every firing need.


TEMPERATURE RINGS

Reliable, repeatable firing is absolutely critical to producing today's high quality components.  This requirement drove the development of Process Temperature Control Rings (PTCR).

The use of PTCR gives our customers a highly accurate representation of firing conditions.  Unlike other, more traditional methods, the PTCR system measures the actual amount of heat that is transferred to the fired products; thus allowing the mapping of the kiln's thermal performance. 

Through application of PTCR technology, our customers have experienced yield improvements, reduced inspection costs and overall quality improvements.  Technical Info


METAL FOAM

SELEE Corporation manufactures open-cell, reticulated metal foam products for a wide range of applications.  Common alloy materials include stainless steels, iron-chromium alloys, and copper alloys.  Uses for metal foam include radiant burners, catalyst supports, flame arrestors, static fluid mixers, and water treatment media, among many others. 

metal_foam_2.jpg

SELEE Metpore® METAL FOAMS

SELEE Metpore® metal foams are available in a wide variety of geometries, porosities and materials.  SELEE metal foams may be made with porosity as high as 98%, and can be optimized for your specific needs.  The material has a high surface area, low thermal mass, good mechanical strength, and provides a tortuous path to fluid flow through the body of the material.

Metpore® Characteristics:

  • Lightweight
  • High surface area
  • Oxidation resistance
  • Flame stabilization
  • Mechanical strength
  • Flow dispersion and mixing

Applications for Metpore® 

  • Radiant burners
  • Flame arrestors
  • Catalyst supports
  • Static fluid mixing
  • Electronics cooling
  • Noise attenuation
  • Electrodes
  • Water treatment
  • Conformable structure
  • And many more

A wide range of materials and configurations are available:

Pore Size:  5ppi – 120ppi

Relative Density:  2% – 25%

Materials:  FeCrAlY, stainless steel, nickel, nickel alloys, copper, brass, steel, titanium casting.

Size:  Maximum dimensions depend on product thickness, density and pore size.  Please contact a product specialist for more information.

See our Metal Foam product brochures here:  

BRC2005-08 Metpore® EFCS.pdf

BRC2005-10 MetFlame® Power Burner

BRC2011-04 MetFlame® A.pdf

 


Carbon Foam

SELEE Corporation manufactures open-cell, reticulated carbon foam products for a wide range of applications.  SELEE® carbon foam is an open-cell reticulated carbon foam with highly controlled pore size and porosity.  Applications include electrodes, catalyst supports, high-temperature filtration, and high-temperature thermal insulation.

SELEE® carbon foams are vitreous reticulated carbon structures available in a wide variety of geometries, porosities and cell sizes.  SELEE® carbon foams may be made with porosity as high as 98% and can be optimized for your specific needs. The material is electrically conductive and corrosion resistant, making it an excellent electrode or catalyst substrate. 

Carbon Foam Characteristics:

  • Extremely lightweight
  • Electrically conductive
  • High surface area
  • Corrosion resistant
  • Low thermal expansion

Applications: 

  • Battery electrodes
  • Catalyst supports
  • Static fluid mixing
  • Heat exchange
  • Noise attenuation


CARBON FOAM Configurations

SELEE® carbon foams are unique reticulated structures designed for use in applications ranging from electrodes to metal filtration.  A wide range of materials and configurations are available: 

Pore Size:  10ppi – 120ppi

Relative Density:  2% – 50% 

Size:  Maximum dimensions depend on product thickness, density and pore size.

Please contact a product specialist for more information.

 

Metal Handling
 

SELEE Corporation's Engineered Ceramics® division offers a wide variety of metal handling products, including crucibles, ladle liners, spouts, and PAK-TITE rams.  For more information, please visit Engineered Ceramics®, a division of SELEE Corporation.

Crucibles

Designed for integrity and performance, Engineered Ceramics® crucibles can have dramatic effects on the cost effectiveness of your shop.  Our crucibles are available in a wide selection of shapes and melting capacities.  For extended crucible life and performance, let our engineering team assist you with technical advice on proper selection, correct installation and sound operational practices.

Ladle Liners

Engineered Ceramics® ladle liners are strong and efficient, innovative in design and consistent in their high performance and are available in a large variety of sizes and spout configurations.  Choose from open-top, or our unique monolithic bottom-pour ladle liners with integrated skimmers.

Spouts

Our unlimited custom-shape capabilities distinguish us from the competition with spouts and integral crucibles tailored to the needs of your shop.  If sizing changes, spout modifications or alterations are necessary to improve your process, you can count on Engineered Ceramics® to provide you with prompt and effective solutions.

PAK-TITE Rams

These high-thermal expansion, dry vibratable ramming materials pack easily and provide maximal density with minimal shifting. PAK-TITE rams are designed for use with Engineered Ceramics® crucibles and ladles and are available in silica and spinel formulations.

 
 

Chemical Processing

 

SELEE® Ceramic Foam for the chemical processing industry is available as catalyst supports, radiation shields, and products for other chemical applications.

SELEE Corporation’s Silcor® CS, the latest innovation in catalyst substrate technology offering a combination of unique physical, thermal, and mechanical properties, can be custom engineered to meet the most challenging catalysis substrate applications. Technical Information→

SELEE Corporation offers Silcor® EFCS Ceramic Foam, the latest innovation in automotive exhaust filtration and catalyst support technology.  The unique tortuous path structure and patented ceramic composition of Silcor® EFCS provides many benefits simply not possible with straight channel structures. Technical Information→

SELEE Corporation offers Silcor® TBCS, the latest innovation in catalyst gauze support and shielding technology. The unique tortuous path structure of Silcor® provides many features and benefits simply not possible with straight channel structures.  
Technical Information→

 

Please contact us for details on how we can help your chemical process with SELEE® products.

ORDER/CUSTOMER SERVICE→